The cold season has arrived, and tinkerers come back to life — grinders, drills, and welders start humming again in garages, the first burners are lit, and the familiar scent of used oil fills the air. Many have already switched to newer, more technologically advanced designs, so the older models with simpler burners are finding their way — for just a few coins — into the hands of new enthusiasts. And that’s exactly how our community keeps growing. Cheers, friends of the oil flame!

Figure 1. “Zejda 1” oil burner, 75% output, fuel: used oil, after 6 hours of operation
Oil combustion comes in many forms, but essentially, there are only two categories: near-zero-emission and safe technology — and all the rest.
And that’s where the real difference begins.
Those using a square burner from Poland or a Chinese webshop, with a single open chamber, can certainly enjoy a spectacular “hellfire” flame — but the efficiency barely exceeds 5 kW per liter per hour of burn time. Smoke, soot, a clogged chimney, and a yellow flame — all part of the package. Such a burner may heat your space, but it also harms — your boiler, your health, and your neighbors — and it’s a dirty job.
It’s a beginning, yes, but a dead end. Anyone who wants more than smoke and ashes must understand the principles — temperature, flame shape and color, and flame direction.
And here comes the swirl pyrolytic burner — my passion project and the result of twelve years of development.
In several combustion chambers, the flames swirl the exhaust gases, which are then forcibly reintroduced into the combustion process. This creates what’s known as swirl pyrolytic combustion — the gases are decomposed to the atomic level, forming new compounds that then burn at temperatures up to 2500 °C.
The result? A blue, perfectly oxygenated flame and minimal emissions.
This led to the creation of the Zejda 1 burner, also known as the Oil Pyrolytic Swirl Burner 10–40 kW with Blue Flame.
It doesn’t just burn oil vapors — the Zejda 2, with its grey-blue flames, can even decompose moisture (not only atmospheric) into hydrogen and oxygen — thereby increasing the heat output beyond 10 kW per liter of oil. To the untrained eye, it might not look as impressive, but it’s far more efficient.

Figure 2. “Zejda 2” oil burner, 75% output, fuel: used oil, after 10 hours of operation
And the best news?
Anyone with basic workshop skills can build such a burner themselves. All you need is an angle grinder, a CO₂ or TIG welder, and a drill.
The challenge lies more in understanding the principle than in the manufacturing. But once you grasp how the system works — how to properly design the burner and a matching heat exchanger — you can achieve efficiencies that commercial burners costing hundreds of thousands could only dream of. Moreover, you can build a burner sized and rated exactly for your needs — from a small apartment to a greenhouse or a large workshop.
If you want the best price-to-performance ratio, use a near-zero-emission burner with a blue flame temperature between 1950 and 2450 °C. Employ a closed combustion system with a chimney exhaust and a flue gas–water heat exchanger — ideally from an old cast-iron gas boiler. It doesn’t have to be functional, as long as it doesn’t leak.
In this configuration, the Zejda 1 and Zejda 2 oil burners operate at maximum efficiency, safely, with minimum emissions — free of sulfates, NOₓ, and dioxins.

Figure 3. “Zejda 1” oil burner, 100% output, fuel: used oil, after 10 hours of operation.
Flame temperature measured by steel color test — a welding wire of known grade and composition turns white at roughly 1200 °C above the flame.
Flame core temperature (at 30–40 mm length) ranges between 1950–2200 °C.
I leave automation to others. My focus is on a clean, simple structural design — without complex electronic systems that are hard to repair at home.
I want every grandfather in every village to be able to provide his grandchildren with cheap, safe, and ecological heat — without a degree in automation.
That’s why I offer a guidebook and construction license for both burners — for 50EUR or 60USD. Over a hundred tinkerers already have it, and since version 7.1 there have been no substantive complaints — only occasional comments regarding the protection of my work.

I’ve been developing, testing, and refining this for over 12 years. I’ve built dozens of prototypes, studied their behavior, and gradually selected the best one — accessible, reliable, and efficient.
Automatic vertical oil burners do exist, but they cost around 200,000 CZK and consume expensive fuel during ignition. Horizontal oil burners cannot burn as efficiently or cleanly as the vertical swirl pyrolytic type.
My system is different — it’s manually ignited, burns steadily for 12–24 hours (depending on oil type), and consumes everything from engine oil to brake fluid to leftover cooking oil — all while remaining safe and easy to understand.
Each build comes with a complete manual — covering operation, maintenance, and the principles behind it.
And answers to the most frequent questions can be found here:
https://letecka-skola-vysocina.cz/e-book-pro-piloty/olejovy-pyrolyticky-virovy-horak-10-40kw-s-modrym-plamenem-spalujici-pouze-vypary-vysokou-teplotou-2500-st-c/index.htm

Figure 4. After reading the book, you might be able to play with flames and create various shapes from them — combining their colors and movements — that is, if you’re also interested in additional light and sound effects beyond the strict efficiency of combustion and operation.
Oil-based heat doesn’t have to be dirty, smoky, smelly, or expensive.
It’s enough to understand that swirl, pyrolysis, high temperature, and patience can transform waste into clean energy.

Figure 4. One of my clients installed a „Zejda 1“ burner in his fireplace stove. This solution carries certain risks, which I explained to him in detail and which are described in the new, updated edition of the book and license 6.0. However, I must admit that the fireplace insert is a technical work of art.
More videos blue flame pyrolytic oil burner: https://www.youtube.com/@blueflamepyrolyticoilburner
✅ What You’ll Get
- A licensed digital copy (book + plans + operating manual) with full instructions, diagrams and build steps.
- The license lets you legally use the design and build it for your own use.
- Secure, password-protected files so only you can open them.
- Bonus: video tutorials showing how to run it cleanly, safely, and effectively (35+ demos).
- Capability to burn waste oils (cooking oil, used motor oil, etc.) — many users get the fuel for free — so your fuel cost ≈ zero.
- The blue flame design ensures cleaner burn, minimal visible emissions, and high thermal efficiency.
⚠️ Important Considerations & Safety (Be a Smart Builder)
- This is a DIY / experimental project. You must comply with local safety, fire, building, and emissions regulations.
- Some jurisdictions require permits or restrictions for burning used oil, so check your local fire or environmental authority.
- Always follow safety procedures, venting, and proper materials.
- We provide clear, step-by-step instructions, but you assume responsibility for your build.
📢 Share & Spread the Word
If you find this interesting, please share with friends, makers, hobbyists, farmers — anyone who would benefit from cheap, clean DIY heating. Let’s build a community around sustainable, smart heating.
🛒 How to Buy / Join
- Send me a direct message by e- mail: filip. zejda@seznam.cz or filip.zejda73@proton.me
- I’ll email you the license agreement
- You complete, sign, and send the license back by email
- You pay the license fee (one time), then receive your files, book, videos, and build rights
Start heating smarter — not harder.
Stay warm • Burn clean • Save big
🔵 Turn waste oil into blue flame energy — almost free heat! 🔵
Filip Zejda
📍 English navigation block (EN):
✅ Get Access to the Technical Work – License Included
(Protected technical work prepared individually, verified access, license terms, and secure delivery with password.)
⚙️ Zejda Burner Models – Overview & Videos
(All Zejda series burners + technical specs + demo videos)
❓ FAQ – Questions & Answers
(Most common practical questions about burners)
📘 Oil Burners – Foreword
(Introduction for all readers, why this project exists)
🔥 Flame Colors, Temperatures & Combustion
(How flame color relates to combustion quality and emissions)
🧯 Oil Burner Safety – Key Principles
(Safety tips and combustible risks with oil burners, dioxines)
🔬 Emissions & NOx Reduction Techniques
(How to reduce NOx and other pollutants, The Secret)
📏 Measurements & Testing Methods
(How to measure emissions and performance, Phenomena, Dripping Water)
🛠️ Construction, Materials & Maintenance
( Fans, Pyrolytic versus atomizing burner, Materials of high-temperature burners)
💬 Key Technical Principle of High-Temperature Pyrolytic Oil Combustion
( Description of burner technologies)
🛠️ Oil burner and the most suitable hot water boiler
( Boilersfor of high-temperature burners)
