How to eliminate NOₓ in a high-temperature oil burner?
By pyrolysis, catalysis, and NOₓ decomposition
NOₓ and high-temperature pyrolytic combustion of used oils with catalytic reduction

Nitrogen oxides (NOₓ) are formed during high-temperature combustion in the presence of oxygen and nitrogen.
NOₓ emissions from combustion arise from three main mechanisms, which give them their names: fuel NOₓ, thermal NOₓ, and prompt NOₓ.
1. Fuel NOₓ
The main source of these nitrogen oxides is fuels containing nitrogen compounds. During combustion, this nitrogen is oxidized to nitrogen oxides and released into the atmosphere together with other combustion products. This type of NOₓ can account for up to 50% of total NOₓ production when burning oils (LTO) and up to 80% when burning coal. Emissions can be reduced or eliminated by using nitrogen-free fuels.
2. Thermal NOₓ
These are formed from N₂ molecules contained in the combustion air. At high temperatures, atmospheric nitrogen dissociates and reacts with oxygen atoms to form nitrogen oxides. The amount produced depends on the combustion temperature and the residence time in the combustion zone. Emissions can therefore be reduced by suitable combustion design.
3. Prompt NOₓ
These are formed when molecular nitrogen is converted via intermediate species to NO at the flame front, through radical reactions in the presence of hydrocarbons. These emissions are difficult to reduce, but their contribution is usually small.

Nitrogen oxides (NOₓ)
The NOₓ group includes a wide range of nitrogen oxides; in mixtures they are collectively referred to as NOₓ. NO oxidizes to NO₂ upon contact with oxygen. The most common species are:
- Nitric oxide (NO) – a colorless, odorless gas
- Nitrogen dioxide (NO₂) – a reddish-brown gas with a pungent odor
Nitrogen dioxide is also used in many industrial processes as a strong oxidizing agent. Due to its oxidizing properties, it can be used in rocket propellants or high-temperature multi-stage oil burners.
Other members of this group include:
- Dinitrogen trioxide (N₂O₃)
- Dinitrogen tetroxide (N₂O₄)
- Dinitrogen pentoxide (N₂O₅)
Other nitrogen oxides occur in smaller quantities and do not represent a significant risk. The densities of the two most important nitrogen oxides are comparable to air, as shown below.
Density comparison of nitrogen oxides and air
(at 101.325 kPa and 20 °C)
- NO₂: 1.448 kg·m⁻³
- NO: 1.430 kg·m⁻³
- Air: 1.29 kg·m⁻³

Temperature as a key factor in NOₓ formation
Temperature is the key factor determining the rate and amount of NOₓ formation during combustion in oil burners.
In combustion engines, peak conditions (e.g. in turbocharged diesel engines) can reach pressures of up to 200 bar (≈197 atm).
Temperature ranges:
Up to 1200 °C
At lower temperatures, NOₓ formation is very small because atmospheric nitrogen (N₂) is chemically very stable. Its dissociation and reaction with oxygen are insignificant.
1200–1500 °C
Measurable amounts of NOₓ begin to form. Atmospheric nitrogen (N₂) dissociates into atomic nitrogen (N), which then reacts with oxygen (O₂) to form nitrogen oxides.
Above 1500 °C
The rate of NOₓ formation increases significantly. This process is known as the thermal NOₓ mechanism and dominates high-temperature combustion.
Around 2000 °C
NOₓ production reaches its maximum. Reactions between atomic oxygen (O) and molecular nitrogen (N₂) are extremely fast. This mechanism is dominant in processes such as gas turbines or internal combustion engines at full load.
Factors influencing NOₓ formation
- Temperature: Higher temperature leads to an exponential increase in NOₓ formation.
- Residence time at high temperature: Longer exposure increases NOₓ formation.
- Excess air: Excess oxygen promotes NOₓ formation.
- Pressure: Higher pressure increases NOₓ emissions.
- Fuel composition: Fuels with a high nitrogen content can produce additional NOₓ (fuel NOₓ).
Minimization of NOₓ formation
- Reduction of combustion temperature: e.g. by exhaust gas recirculation (EGR) or flame cooling.
- Use of low-NOₓ burners: Better control of air and fuel supply.
- Optimization of excess air: Minimizing oxygen beyond the required amount.
- Catalytic reduction: Conversion of NOₓ into harmless N₂ and H₂O using catalysts.
- Reduction of overpressure in the combustion chamber, ideally in the final stage of the burner.

Elimination of NOₓ at very high temperatures
Eliminating nitrogen oxides (NOₓ) at very high temperatures by pyrolysis or atomic dissociation is a complex process dependent on temperature, chemical conditions, and exposure time.
1. NOₓ elimination by pyrolysis
Pyrolysis is the thermal decomposition of chemical substances at high temperatures in the absence or with a limited amount of oxygen.
Principle:
At very high temperatures, NOₓ can decompose into basic components—atomic nitrogen (N) and atomic oxygen (O)—which can recombine into N₂ and O₂.
Temperature:
NOₓ pyrolysis occurs above 1800 °C, with efficiency increasing with temperature.
Conditions:
Effective pyrolysis requires a reducing environment, i.e. the presence of oxygen-scavenging substances such as hydrocarbons, CO, or H₂.
NOₓ pyrolysis is often combined with other technologies such as exhaust gas recirculation (EGR) or selective non-catalytic reduction (SNCR), where reducing agents like ammonia (NH₃) or urea (CO(NH₂)₂) are injected.
2. Atomic-level dissociation of NOₓ
The dissociation of NOₓ into atomic nitrogen (N) and oxygen (O) requires extremely high temperatures due to the strong N–O bonds.
Key temperature points:
- Onset of dissociation (1400–1600 °C):
NO and NO₂ begin to split into atomic components.
Reaction: NO → N + O - Significant dissociation (above 2000 °C):
Most NOₓ is decomposed into atomic N and O. - Recombination to N₂ and O₂ (above 2200 °C):
Atomic nitrogen and oxygen recombine into molecular nitrogen (N₂) and oxygen (O₂), which is the stable state at high temperatures.
3. Practical use of pyrolytic reactions
In practice, NOₓ pyrolysis alone is difficult due to extreme temperatures and energy demands. Therefore, it is combined with:
- Reducing environments: Addition of reductants that promote NOₓ conversion to N₂.
- Rapid quenching: Fast cooling of flue gases after dissociation to prevent re-formation of NOₓ.
Summary
- NOₓ pyrolysis is effective above 1800 °C, where NOₓ decomposes into atomic nitrogen and oxygen.
- NOₓ dissociation begins around 1400–1600 °C and is nearly complete above 2000 °C.

Catalysts for NOₓ dissociation
Several catalysts can be used to dissociate NOₓ into less harmful components such as N₂ and O₂. The cheapest options often use readily available materials with sufficient efficiency.
1. Common low-cost catalysts
a) Metal oxides
Materials: CuO, Fe₂O₃, MnO₂, TiO₂
Advantages: Low cost, good efficiency at low to medium temperatures (200–400 °C).
Disadvantages: Lower efficiency at high temperatures, need for precise flue-gas control.
b) Zeolites
Materials: Natural or synthetic zeolites doped with metals (e.g. Fe-zeolite, Cu-zeolite).
Advantages: Good stability and efficiency at low temperatures, relatively low cost.
Disadvantages: Limited resistance to high temperatures and contaminants.
c) Activated carbon
Can be impregnated with metals (Cu, Fe).
Advantages: Cheap and widely available.
Disadvantages: Lower efficiency and limited thermal stability.
2. Low-cost reduction technologies
a) Ammonia (NH₃) or urea
Used with TiO₂ or Fe₂O₃ catalysts.
Reaction: NO + NH₃ + O₂ → N₂ + H₂O
Advantages: Low cost.
Disadvantages: Requires precise dosing to prevent ammonia slip.
b) Selective Non-Catalytic Reduction (SNCR)
Uses ammonia or urea without catalysts at 900–1100 °C.
Advantages: No catalyst cost.
Disadvantages: Requires high temperature and precise control.
3. Alternative catalysts from waste materials
a) Industrial waste
Materials: Fly ash, iron-containing waste.
Advantages: Minimal raw-material cost.
Disadvantages: Lower efficiency, processing required.
b) Ceramic materials
Ceramics impregnated with metal oxides (Cu, Fe).
Advantages: High-temperature resistance, low cost.
Disadvantages: Lower efficiency than platinum catalysts.
4. Low-cost combinations
The combination of TiO₂ (as a carrier) with inexpensive metal oxides (CuO, Fe₂O₃) is considered the cheapest effective solution for low-cost NOₓ reduction.
Optimized temperatures:
- 200–400 °C (low-temperature applications)
- Up to 800 °C for some oxides
Iron(III) oxide (Fe₂O₃)
Iron(III) oxide is a compound of trivalent iron and oxygen. Limonite is hydrated iron(III) oxide. It most commonly occurs in the α-crystalline modification as a brown-red powder. In nature it occurs as the mineral hematite, which has a rhombohedral structure and antiferromagnetic properties. When heated to 675 °C, it transforms into the β modification, which is ferromagnetic and has a body-centered cubic lattice. At 775 °C, it transitions into the γ modification, which has a cubic lattice and occurs in the mineral maghemite. Hydrated iron oxide is also a component of rust.
One historical use of iron(III) oxide was in audio cassettes and magnetic tapes. In powdered form it is used in a pyrotechnic mixture with aluminum known as thermite:
2 Al + Fe₂O₃ → 2 Fe + Al₂O₃
Conclusion
The simplest and cheapest ways to reduce NOₓ are the following methods and their combinations:
- Multi-chamber, multi-stage oil burner design for heavy fuel oils and used motor oils with combustion additives.
- Very high temperatures in a purpose-designed multi-stage oil burner, where each stage has a specific environment and temperature.
- Vortex processes controlled by pressure and nozzles, allowing regulation of vacuum zones, overpressure, accelerated flow, mixture flushing, and surface cooling. Each chamber has a specific flow pattern for a specific purpose.
- Burner material: Multi-stage vortex pyrolytic burners made from carbon steel or cast steel catalytically reduce NOₓ on steel surfaces, forming iron(III) oxide, visible as a red coating inside the burner and flame plate. Iron oxide is also released to a secondary catalyst: activated carbon.
- Catalytic reductants: Adding wood chips, preferably charcoal, or ideally bones to the burner core. Further thermal reactions produce animal charcoal (activated carbon).
- Pressure control: Lower operating overpressure in the final high-temperature stage of a multi-chamber oil burner reduces NOₓ formation.
Filip Zejda
📍 English navigation block (EN):
✅ Get Access to the Technical Work – License Included
(Protected technical work prepared individually, verified access, license terms, and secure delivery with password.)
⚙️ Zejda Burner Models – Overview & Videos
(All Zejda series burners + technical specs + demo videos)
❓ FAQ – Questions & Answers
(Most common practical questions about burners)
📘 Oil Burners – Foreword
(Introduction for all readers, why this project exists)
🔥 Flame Colors, Temperatures & Combustion
(How flame color relates to combustion quality and emissions)
🧯 Oil Burner Safety – Key Principles
(Safety tips and combustible risks with oil burners, dioxines)
🔬 Emissions & NOx Reduction Techniques
(How to reduce NOx and other pollutants, The Secret)
📏 Measurements & Testing Methods
(How to measure emissions and performance, Phenomena, Dripping Water)
🛠️ Construction, Materials & Maintenance
( Fans, Pyrolytic versus atomizing burner, Materials of high-temperature burners)
💬 Key Technical Principle of High-Temperature Pyrolytic Oil Combustion
( Description of burner technologies)
🛠️ Oil burner and the most suitable hot water boiler
( Boilersfor of high-temperature burners)
