Štítek: waste oil burner

  • How to Recognize the Truth About a Waste Oil Burner

    How to Recognize the Truth About a Waste Oil Burner

    (A Story of a Flame That Separates Illusion from Technical Reality)

    Recently, a man sent me a video of a waste oil burner .

    “Look,” he wrote, “this is just like yours. Nothing new.”

    On the screen, long, laminar flames stretched from the outer ring to the center like threads of light. Mostly blue, some yellow. It looked strong. Convincing. Almost hypnotic.

    It took just a few seconds.

    And I knew immediately: this burner was not right.

    Not because I wanted to be clever.
    But because when you spend hundreds and then thousands of hours on waste oil combustion, testing, measuring, rebuilding, dead ends, and starting over – studying pyrolytic processes and analyzing flame behavior – you begin to truly understand the flame.

    Its voice.
    Its shape.
    Its calm — or its rebellion.

    You recognize laminar or turbulent flow, the length of the flame, its intensity, and even the color of the surrounding steel.

    The flame speaks.
    The steel speaks.

    And those who have learned to listen understand instantly.


    What a Video Will Never Show

    A video shows the first five minutes.
    Maybe the first thirty.

    It shows ignition. The perfect blue color. Possibly dramatic music.

    But it does not show:

    • how much energy the burner needs to reach operational temperature,
    • what happens after 12 hours,
    • what happens after the first night,
    • what happens after the second night,
    • and certainly not what happens on the third night.

    Real waste oil is not light fuel.
    It contains components that slow combustion. Often contains emulsions or water.


    It requires very high temperatures to vaporize and pyrolyze properly.

    For clean combustion, the correct air-fuel ratio alone is not enough.
    You need:

    • a strong radiative environment,
    • a stable thermal core,
    • controlled air flow,
    • precise combustion chamber geometry,
    • and about 15 other interacting variables.

    Steel glowing cherry red to light red is not a flaw.
    It indicates that the vaporization and pyrolytic process is proceeding correctly.
    Bright orange would already indicate material stress and degradation, which is intentionally avoided here.

    In contrast, a black, relatively cool burner with blue flames often indicates lighter fuel – diesel, kerosene, or other easily combustible liquids.

    Illusion is always easier than reality.

    oil burner

    Peter and His “Almost Working” Burner

    Peter built his burner from an online plan.

    He was excited. First ignition – success. It burned. Even beautifully.

    The first evening, he sat happily by the heater.
    “It works,” he thought.

    After six hours, the situation changed.
    The flame grew heavier, yellowish.
    He had to adjust the air supply, sometimes the fuel flow.

    By the eighth hour, he noticed a smell of hydrogen sulfide.
    The flame was sluggish, orange in parts. Gaps appeared between the flames.
    Some flames detached from the nozzles.
    Power dropped.
    The heat exchanger slowly clogged with thick, oily soot.

    If the flame has gaps and exhaust gases escape outside the flame, efficiency drops dramatically.
    Incomplete combustion escapes, the burner becomes inefficient and environmentally harmful, and exhaust gases can be toxic, clogging both the heat exchanger and the chimney.

    Peter began to doubt himself.

    “I’ll enlarge the opening.”
    “I’ll add more air.”
    “I’ll change the combustion chamber.”

    Weeks turned into months. Welding. Cutting. Adjusting. Looking for plans. Studying videos.

    The burner worked almost.

    But never stably.
    Never long-term.

    Peter thought he lacked skill.

    In reality, he lacked the critical knowledge: understanding long-term thermal stability and pyrolytic processes, which only thousands of hours of experience can provide.


    The Truth Appears on the Third Night

    Every burner must first invest energy into itself.
    It must heat up.
    Bring the steel to cherry red to light red.
    Create a stable thermal core.

    This requires energy.
    This is physics.

    But when the system is correctly designed, it reaches equilibrium.

    And it holds.

    Not just an hour.
    Not just one night.

    It holds through the second night.
    It holds through the third night.

    72 hours of continuous operation without flame collapse, without gaps, without pulsing – this is no coincidence.

    This is engineering skill.
    This is knowledge of waste oil combustion, heat transfer, ash management, and flow dynamics.

    Here, construction separates from improvisation.
    Here, physics speaks.


    One Tip That Can Save Years

    When evaluating a waste oil burner, whether a vaporization burner or atomizing burner, never judge by the first flame.

    White or pale yellow flames are warnings.
    Orange flames indicate serious problems.

    Even blue flames are no guarantee – especially if there are gaps between the flames.
    Gaps allow incomplete combustion to escape, reducing efficiency, creating toxic exhaust, and clogging the heat exchanger and chimney.

    Always inspect the burner:

    • after 1 hour,
    • after 12 hours,
    • after 24 hours,
    • after 72 hours of continuous operation.

    Ask about combustion chamber temperature.
    Ask about actual fuel consumption.
    Ask about flame stability without intervention.

    True quality is not shown at ignition.

    It shows on the third night — when you go to sleep knowing everything burns stably, cleanly, and safely.


    The Most Important Thing

    It is not about ego.
    It is not about competition.

    It is about avoiding years in an “almost working” system.
    About not doubting yourself every time the flame turns yellow.

    The flame does not lie.

    Its sound.
    Its stability.
    Its form.
    The color of the steel around it.

    Prodejní stránka olejové hořáky Zejda
    Olejový hořák Zejda 3

    Whoever learns to read the flame — its behavior and the color of the surrounding steel — will never go the wrong way again.

    Filip Zejda


    📍 English navigation block (EN):

    ✅ Get Access to the Technical Work – License Included

    (Protected technical work prepared individually, verified access, license terms, and secure delivery with password.)

    ⚙️ Zejda Burner Models – Overview & Videos
    (All Zejda series burners + technical specs + demo videos)

    ❓ FAQ – Questions & Answers
    (Most common practical questions about burners)

    📘 Oil Burners – Foreword
    (Introduction for all readers, why this project exists)

    🔥 Flame Colors, Temperatures & Combustion
    (How flame color relates to combustion quality and emissions)

    🧯 Oil Burner Safety – Key Principles
    (Safety tips and combustible risks with oil burners, dioxines)

    🔬 Emissions & NOx Reduction Techniques
    (How to reduce NOx and other pollutants, The Secret)

    📏 Measurements & Testing Methods
    (How to measure emissions and performance, Phenomena, Dripping Water)

    🛠️ Construction, Materials & Maintenance
    ( Fans, Pyrolytic versus atomizing burner, Materials of high-temperature burners)

    💬 Key Technical Principle of High-Temperature Pyrolytic Oil Combustion
    ( Description of burner technologies)

    🛠️ Oil burner and the most suitable hot water boiler
    (
    Boilersfor of high-temperature burners)

  • Zejda’s Oil Burners

    Zejda’s Oil Burners

    Pyrolytic and cracking Zejda’s oil burners for burning used oils

    The Zejda series oil burners are vertical oil burners designed to burn oil vapors and pyrolytic gases, not liquid oil directly.
    Their operating principle is based on controlled pyrolysis, cracking, and subsequent combustion of already decomposed combustible components in multiple combustion chambers.

    Olejový hořák Zejda 1
    Provoz hořáku na olejovou emulzi

    The goal of the design is not maximum complexity, but functional efficiency, flame stability, low residue volume, and the ability to burn problematic fuels that conventional oil burners cannot handle.

    The burners are designed as a DIY system, manufacturable under home conditions from commonly available materials, without the need for precision machining or advanced manufacturing technology.


    Common features of Zejda series burners

    • vertical construction
    • at least three combustion chambers
      (pyrolytic, evaporation, pre-combustion + open final combustion chamber)
    • one or two air preheating and distribution chambers
    • smooth power regulation approximately from 30% to 100%
    • regulation achieved by a combination of:
      • supplied fuel quantity
      • supplied air quantity and pressure
      • air distribution ratio between individual chambers
      • intensity of swirl flow
      • interaction between individual chambers

    Each burner has one or more operating modes in which it achieves optimal efficiency, stability, and emission performance. These modes and the method to reach them are described in detail in the operating manual.


    Fuel for Zejda’s Oil Burners

    Zejda series burners are designed to burn:

    • all types of used oils
    • oils containing ignition-resistant additives
    • oils contaminated with water up to approximately 7% by weight

    The design is adapted to real-world operating conditions, not laboratory-grade fuels.


    Self-stabilizing flame operation Zejda’s Oil Burners

    All Zejda series oil burners operate in a self-stabilizing combustion mode.

    This means the flame is able to automatically re-ignite after a short-term flame extinction without operator intervention.
    This phenomenon may occur, for example, during temporary decomposition of water contained in the oil.

    The flame automatically reappears without the need for manual restart.


    Zejda 1 Oil Burner

    Basic and simplest design

    Power output: approx. 10–36 kW
    Construction: double-shell
    Fan: 1×, power consumption approx. 60–80 W
    Burner diameter: approx. 240 mm
    Minimum dimensions: approx. 280 × 280 × 350 mm
    Flame: long, laminar, deep blue
    Flame temperature: approx. 1950–2100 °C
    Heating value: approx. 9–10 kWh per kg of oil

    Zejda 1 is the simplest version of the Zejda burner series. It produces a long, calm blue flame that visually resembles a gas burner flame. This type of flame is intuitively understandable and trusted by many users.

    The burner is primarily intended for:

    • cast iron gas boilers
    • retrofitting older heating systems
    • users seeking a simple solution with acceptable emission levels

    Its advantages include a self-stabilizing flame and relatively easy adjustment.


    Zejda 2 Oil Burner

    Precise combustion control, higher output, improved emissions

    Power output: approx. 10–40 kW
    Minimum dimensions: approx. 280 × 280 × 350 mm
    Construction: double- to triple-shell
    Fans: separate fan for each air preheating chamber
    Flame: short, sharp, blue-white, strongly turbulent
    Heating value: approx. 10–11 kWh per kg of oil

    Zejda 2 is structurally based on Zejda 1 but adds strict separation of air chambers and their independent control. This allows very precise adjustment of stoichiometric ratios in individual combustion zones and controlled swirl flow.

    The burner is suitable for:

    • users requiring higher power output
    • systems where precise combustion tuning is required
    • demanding applications with higher heat demand

    The flame is significantly shorter, more aggressive, and highly turbulent.


    Zejda 3 Oil Burner

    Compact burner for small spaces with maximum efficiency

    Power output: approx. 6–20 kW
    Minimum dimensions: approx. 245 × 245 × 250 mm
    Fan: 1×, power consumption approx. 60–80 W
    Equipment: flame backflow protection flap, stoichiometric control flap
    Flame: short, dark blue to violet-tinted, transparent
    Heating value: approx. 11 kWh per kg of oil

    Zejda 3 was developed directly at the request of users who needed a small, reliable burner for:

    • small houses
    • apartments
    • garages and workshops

    This burner operates with intensive high-temperature decomposition of oil vapors. Oil diluents are broken down into hydrogen, methane, and other combustible components, which are subsequently burned in flame plasma without gaps between flame zones.

    At first glance, the flame may appear “weak” to users accustomed to long yellow or blue flames. In reality, Zejda 3 achieves the highest heating value in the series, thanks to deep fuel decomposition before combustion.


    Maintenance and operation Zejda’s Oil Burners

    Compact burner for small spaces with maximum efficiency

    Power output: approx. 6–20 kW
    Minimum dimensions: approx. 245 × 245 × 250 mm
    Fan: 1×, power consumption approx. 60–80 W
    Equipment: flame backflow protection flap, stoichiometric control flap
    Flame: short, dark blue to violet-tinted, transparent
    Heating value: approx. 11 kWh per kg of oil

    Zejda 3 was developed directly at the request of users who needed a small, reliable burner for:

    • small houses
    • apartments
    • garages and workshops

    This burner operates with intensive high-temperature decomposition of oil vapors. Oil diluents are broken down into hydrogen, methane, and other combustible components, which are subsequently burned in flame plasma without gaps between flame zones.

    At first glance, the flame may appear “weak” to users accustomed to long yellow or blue flames. In reality, Zejda 3 achieves the highest heating value in the series, thanks to deep fuel decomposition before combustion.


    Maintenance and operation

    Each model has slightly different requirements for operation and maintenance. These differences are described in detail in the operating and service manual, including:

    • the most common errors
    • their causes
    • procedures for effective correction

    Proper adjustment is essential not only for performance but also for ecological and economical operation.


    Design philosophy Zejda’s Oil Burners

    Zejda series burners were designed so that:

    • they can be manufactured by users themselves
    • they do not require expensive machines or special technologies
    • they use commonly available materials from scrap yards and vehicle dismantling sites

    The goal is the fastest possible spread of pyrolytic and cracking combustion technology among users who currently burn oil in technically outdated or inefficient burners.


    Design author

    Filip Zejda
    E-mail: filip.zejda@seznam.cz or filip.zejda73@proton.me

    BurnerLab by Zejda

    For each model, operational videos are available showing real burner operation without modifications or embellishment.


    Build with Confidence: Complete Burner Plans and Guides

    You can order from me a complete book for building your own burner, which includes all design calculations, detailed manufacturing drawings for all three burners, a full operational and maintenance manual, and step-by-step instructional videos.

    This ensures you get authentic, fully tested plans—not copies with errors, and not deliberately flawed designs. With these plans, if you follow the steps carefully and understand the process, your burner will work exactly as described and demonstrated in the videos.

    Save yourself the frustration, wasted materials, and trial-and-error attempts. Order directly from the author and designer of these burners, and build with confidence, knowing it will really work.

    Price: 50 EUR | 63 USD | 79 CAD

    📍 English navigation block (EN):

    ✅ Get Access to the Technical Work – License Included

    (Protected technical work prepared individually, verified access, license terms, and secure delivery with password.)

    ⚙️ Zejda Burner Models – Overview & Videos
    (All Zejda series burners + technical specs + demo videos)

    ❓ FAQ – Questions & Answers
    (Most common practical questions about burners)

    📘 Oil Burners – Foreword
    (Introduction for all readers, why this project exists)

    🔥 Flame Colors, Temperatures & Combustion
    (How flame color relates to combustion quality and emissions)

    🧯 Oil Burner Safety – Key Principles
    (Safety tips and combustible risks with oil burners, dioxines)

    🔬 Emissions & NOx Reduction Techniques
    (How to reduce NOx and other pollutants, The Secret)

    📏 Measurements & Testing Methods
    (How to measure emissions and performance, Phenomena, Dripping Water)

    🛠️ Construction, Materials & Maintenance
    ( Fans, Pyrolytic versus atomizing burner, Materials of high-temperature burners)

    💬 Key Technical Principle of High-Temperature Pyrolytic Oil Combustion
    ( Description of burner technologies)

    🛠️ Oil burner and the most suitable hot water boiler
    (
    Boilersfor of high-temperature burners)